Installation method of solenoid valve of water purifier
Step 1: Close the main tap water switch, install the stainless steel tee and ball valve at the water intake position, and connect the PE pipe to the water inlet of the water purifier.
Step 2: Connect the flushing port with about 15cm PE pipe, connect the plastic flushing ball valve, and then connect the PE pipe of appropriate length.
Step 3: Install gooseneck faucet and connect it to water outlet of water purifier.
Step 4: Open the main tap water switch, the water inlet ball valve and the plastic flushing ball valve at the flushing port for about 5 minutes, and close the plastic flushing ball valve when there is no black water at the flushing port.
Step 5: Turn on the gooseneck faucet to wash for 15-30 minutes, and then wash the alcohol protective liquid in the filter element (until there is no alcohol smell in the water) to use normally.