Installation steps of mural water purifier

- Sep 12, 2020-

1.Installation steps of mural water purifier

Part I: turn off the tap water master switch, install the stainless steel tee and ball valve at the water intake position, and connect the PE pipe to the water inlet of the purifier

Step 2: Connect the rinse mouth with a PE pipe of about 15cm, connect the plastic rinse ball valve, and connect the PE pipe of appropriate length in the connection

Step 3: Install the gooseneck faucet and connect it to the water outlet of the water purifier

Step 4: Turn on the tap water main switch, the inlet ball valve and the plastic flush ball valve of the rinse port for about 5 minutes, and close the plastic flush ball valve until there is no black water in the rinse port

Step 5: Turn on the gooseneck faucet and rinse for 15-30 minutes. Then rinse the alcohol protective liquid in the filter element and use it normally